Share:


C6111



Factory Hospital Office Access Flooring Electronic IT
           

LG Hausys Floors

TECHNICAL DATA
Static Pulse

Item Standard Test Method Specification Conductive Tile Dissipative Tile

Electrical/ Electrostatic Properties
Electrical Resistance ESD S 7.1 Static Conductive :
2.5 x 104 ~ 106Ω
2.5 x 104 ~ 106Ω 106 ~ 109Ω
ASTM F 150 Static Dissipative :
106 ~ 109Ω
         
Static Generation AATCC-134   0.1KV 0.2KV
         
Static Decay Federal Test Method
101B Method 4046
< 0.5 sec 0.01 sec 0.01 sec

Other Properties        
Classifcation EN 685   Class 34 + 43
         
Composition Of Material ASTM F 1700,
Certifcate of Compliance
  Homogeneous
         
Thickness ASTM F 386, EN 428 as specifed ± 0.13mm Meets Standard
         
Nominal Sizes ASTM F 536, EN 427 <± 0.4mm / 304.8mm Meets Standard
         
Squareness ASTM F 2055 maximum 0.25mm Meets Standard
         
Residual Indentation ASTM F1914, EN 433 average less than 8%,
max. single reading 10%
< 8 %
         
Flexibility ASTM F 137 no crack or break No crack or break
         
Dimensional Stability ASTM F 2199, EN 434 < 0.51mm / 304.8mm Meets Standard
         
Resistance To Chemicals ASTM F 925, EN 423 no more than a slight change in surface
dulling, surface attack, or staining
No more than a slight change in surface
dulling, surface attack, or staining
         
Resistance To Heat ASTM F 1514 ΔE < 8 ave., max Meets Standard
         
Resistance To Light ASTM F 1515 ΔE < 8 ave., max Meets Standard
         
Static Load Limit ASTM F 970-93 - 0.005”(at 2500 psi), 0.127mm(at 175kgf/cm2)
         
Smoke Density ASTM E 662 < 450 < 450
         
Flame Spread ASTM E 84, NFPA 225   < 75
         
Thermal Conductivity DIN 52612   0.309 W/(m.k)
         
Critical Radiant Flux ASTM E 648, NFPA 253   Class 1 ( > 0.45 w/cm2)
         
Abrasion Resistance ASTM D 1044, CS-10-F Wheel, 500gm Weights   Cycl % Gauge Loss
      2,500 0.22
      5,000 0.44
      7,500 0.65
      10,000 0.86
         
Resistance To Wear EN 660-1   Group M
         
Castor Chair Suitablilty EN 425   No damage
         
Color Fastness EN ISO 105 B02   At least 6
         
Standard For Health Care Facilities NFPA 99   Confrms to the requirement of NFPA 99 in effect at the time of installation
         
Fulflls Product Requirements EN 649   Yes
         
Underwriters Laboratories UL 779   Meets UL Standard
         
Burning Characteristics EN 13501-1   Bfl-S1
         

Warranty        
Guarantee For Manufacturing
Defects And Wear-Out*
No Damage   5 Years
         
Conductivity*     Lifetime


 Inquiry - C6111